Google Ad

How to change the IP Address on a 1net1 R-90 router ? – Router Setup


How to change the IP Address on a 1net1 R-90 router ? – Router Setup

How to change the IP Address on a 1net1 R-90 router ? – Router Setup

  • Login in Router using following IPs – Must Connect your wife in device – Mobile or Laptop or Pc
192.168.0.1
192.168.1.1
10.0.0.1

  • On the 1net1 R-90 when you first log in you should see the Router Status screen. This screen says Mobile Broadband Gateway R-90 at the top in a yellow bar. To change the IP Address on the 1net1 R-90 you start by clicking on LAN IP Setup in the left column.

    Configure the LAN section of your 1net1 R-90

In the box labeled IP Address type in the new IP Address that you have chosen for your router. Leave the Subnet Mask set to 255.255.255.0, which should be the default. You can also leave the DHCP settings alone, the 1net1 R-90 will pick them for you.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

 

Have any Question or Comment?

Leave a Reply

Your email address will not be published. Required fields are marked *